NPower Generator | Sound Proof Containers | Automation Technologies Skip to content

PRODUCTS

SOUND PROOF
CONTAINERS

As NPOWER, we produce diesel or gas generator sound and weather insulation containers with high tech specifications in ISO standard sizes or in special designs according to your special needs for all type of projects.
At the same time depending on the power of diesel or gas generator, we can make acoustic louver and sound dampening cabin applications for air outlet and inlet. Also, we use critical type silencers in container type sound insulation containers.
Beside top-notch volume insulation, the biggest advantage of our NPOWER diesel or gas generator sound insulation containers is their design that makes it possible to get service for the diesel generator within the containers.

10 Feet Containers

Container dimensions: 3050 x 2440xH: 2590 mm.

* Base frame will be manufactured from 2/3 tear sheets over NPU profile.
* Cabin side (wall) sheets 1,5and roof sheets will be 2 mm dkp trapezoidal sheet.
* Container will be insulated with galvanized perforated sheet over 5 cm rock wool.
* ISO type lifting lugs are available on the container.
* 1 unit of emergency stop buttons will be on the container.
* There will be 1 unit container doors and 1 units of door with panic bar.
* Paint application of the container will, epoxy undercoat and epoxy topcoat paint. Colour codes will be shared by customer after order.
* There will be ladder near by the container.
* Air intake and air outlet will be a standard blind.
* There will be 2×36W armatures and 1 single-phase socket in the cabin. Installation 16 plastic flame retardant plastic pipes shall be made as surface mounted. A fuse box will be placed near the cable entry. TTR cables shall be used as installation cables.
* Installation of generator  is excluded.
* Silencers, sound panels, fuel tanks are not in our scope.
* Compensators, elbows, nuts, washer, bolts are out of scope.
* Seismic or standard isolators are not in our scope.

20 Feet Containers

Container dimensions: 6060x2440x2590mm

* Base frame will be manufactured from 2/3 tear sheets over NPU profile.
* Cabin side (wall) sheets 1,5 and roof sheets will be 2 mm dkp trapezoidal sheet.
* Container will be insulated with galvanized perforated sheet over 5 cm rock wool.
* ISO type lifting lugs are available on the container.
* 1 unit of emergency stop buttons will be on the container.
* There will be 1 unit container doors and 1 units of door with panic bar.
* Paint application of the container will, epoxy undercoat and epoxy topcoat paint. Colour codes will be shared by customer after order.
* There will be ladder near by the container.
* Air intake and air outlet will be a standard blind.
* There will be 3×36W armatures and 1 single-phase socket in the cabin. Installation 16 plastic flame retardant plastic pipes shall be made as surface mounted. A fuse box will be placed near the cable entry. TTR cables shall be used as installation cables.
* Installation of generator is excluded.
* Silencers, sound panels, fuel tanks are not in our scope.
* Compensators, elbows, nuts, washer, bolts are out of scope.
* Seismic or standard isolators are not in our scope.

20 Feet High Cube Container

Container dimensions: 6060x2440x2890mm

* Base frame will be manufactured from 2/3 tear sheets over NPU profile.
* Cabin side (wall) sheets 1,5 and roof sheets will be 2 mm dkp trapezoidal sheet.
* Container will be insulated with galvanized perforated sheet over 5 cm rock wool.
* ISO type lifting lugs are available on the container.
* 1 unit of emergency stop buttons will be on the container.
* There will be 1 unit container doors and 1 units of door with panic bar.
* Paint application of the container will, epoxy undercoat and epoxy topcoat paint. Colour codes will be shared by customer after order.
* There will be ladder near by the container.
* Air intake and air outlet will be a standard blind.
* There will be 3×36W armatures and 1 single-phase socket in the cabin. Installation 16 plastic flame retardant plastic pipes shall be made as surface mounted. A fuse box will be placed near the cable entry. TTR cables shall be used as installation cables.
* Installation of generator is excluded.
* Silencers, sound panels, fuel tanks are not in our scope.
* Compensators, elbows, nuts, washer, bolts are out of scope.
* Seismic or standard isolators are not in our scope.

30 Feet Containers

Container dimensions: 2440×9190×H: 2590 mm

* Base frame will be manufactured from 2/3 tear sheets over NPU profile.
* Cabin side (wall) sheets 1,5 and roof sheets will be 2 mm dkp trapezoidal sheet.
* Container will be insulated with galvanized perforated sheet over 5 cm rock wool.
* ISO type lifting lugs are available on the container.
* 1 unit of emergency stop buttons will be on the container.
* There will be 1 unit double-leaf door, 1 unit contaİner doors and 1 units of door with panic bar.
* Paint application of the container will, epoxy undercoat and epoxy topcoat paint. Colour codes will be shared by customer after order.
* There will be ladder near by the container.
* Air intake and air outlet will be a standard blind.
* There will be 3×36W armatures and 1 single-phase socket in the cabin. Installation 16 plastic flame retardant plastic pipes shall be made as surface mounted. A fuse box will be placed near the cable entry. TTR cables shall be used as installation cables.
* Installation of generator is excluded.
* Silencers, sound panels, fuel tanks are not in our scope.
* Compensators, elbows, nuts, washer, bolts are out of scope.
* Seismic or standard isolators are not in our scope.

30 Feet High Cube Container

Container dimensions: 2440×9190×H: 2890 mm

* Base frame will be manufactured from 2/3 tear sheets over NPU profile.
* Cabin side (wall) sheets 1,5 and roof sheets will be 2 mm dkp trapezoidal sheet.
* Container will be insulated with galvanized perforated sheet over 5 cm rock wool.
* ISO type lifting lugs are available on the container.
* 1 unit of emergency stop buttons will be on the container.
* There will be 1 unit double-leaf door, 1 unit container doors and 1 units of door with panic bar.
* Paint application of the container will, epoxy undercoat and epoxy topcoat paint. Colour codes will be shared by customer after order.
* There will be ladder near by the container.
* Air intake and air outlet will be a standard blind.
* There will be 3×36W armatures and 1 single-phase socket in the cabin. Installation 16 plastic flame retardant plastic pipes will be made as surface mounted. A fuse box will be placed near the cable entry. TTR cables shall be used as installation cables.
* Installation of generator  is excluded.
* Silencers, sound panels, fuel tanks are not in our scope.
* Compensators, elbows, nuts, washer, bolts are not in our scope.
* Seismic or standard isolators are not in our scope.

40 Feet Containers

Container dimensions: 2440×12190×H: 2590 mm

* Base frame will be manufactured from 2/3 tear sheets over NPU profile.
* Cabin side (wall) sheets 1,5 and roof sheets will be 2 mm dkp trapezoidal sheet.
* Container will be insulated with galvanized perforated sheet over 5 cm rock wool.
* ISO type lifting lugs are available on the container.
* 1 unit of emergency stop buttons will be on the container.
* There will be 1 unit double-leaf door, 1 unit container doors and
1 units of door with panic bar.
* Paint application of the container will, epoxy undercoat and epoxy topcoat paint. Colour codes will be shared by customer after order.
* There will be ladder near by the container.
* Air intake and air outlet will be a standart blind.
* There will be 4×36W armatures and 1 single-phase socket in the cabin. Installation 16 plastic flame retardant plastic pipes shall be made as surface mounted. A fuse box will be placed near the cable entry. TTR cables shall be used as installation cables.
* Installation of generator  is excluded.
* Silencers, sound panels, fuel tanks are not in our scope.
* Compensators, elbows, nuts, washer, bolts are out of scope.
* Seismic or standard isolators are not in our scope.

40 Feet High Cube Container

Container dimensions: 2440×12190×H: 2890 mm

* Base frame will be manufactured from 2/3 tear sheets over NPU profile.
* Cabin side (wall) sheets 1,5 and roof sheets will be 2 mm dkp trapezoidal sheet.
* Container will be insulated with galvanized perforated sheet over 5 cm rock wool.
* ISO type lifting lugs are available on the container.
* 1 unit of emergency stop buttons will be on the container.
* There will be 1 unit double-leaf door, 1 unit contaıner doors and
1 units of door with panic bar.
* Paint application of the container will, epoxy undercoat and epoxy topcoat paint. Colour codes will be shared by customer after order.
* There will be ladder near by the container.
* Air intake and air outlet will be standard blinds.
* nThere will be 4×36W armatures and 1 single-phase socket in the cabin. Installation 16 plastic flame retardant plastic pipes shall be made as surface mounted. A fuse box will be placed near the cable entry. TTR cables shall be used as installation cables.
* Installation of generator is excluded.
* Silencers, sound panels, fuel tanks are not in our scope.
* Compensators, elbows, nuts, washer, bolts are out of scope.
* Seismic or standard isolators are not in our scope.

GET AN OFFER

Please contact us or filling out the form below for more detailed information and get an offer.

Company Information

Product Information